How to Install Windows Server 2008
Windows Server 2008 is all the buzz lately …
We’ve already told you how to score your free copy of Server 2008 that Microsoft is giving away at their launch events.
So today I’ll show you all the steps to installing Windows Server 2008. We’ll briefly go over the different editions and hardware requirements and then get right into the installation.
But before we get started, I do want to mention that we will be releasing comprehensive training covering Server 2008 that Ben “Coach” Culbertson is working on, so keep an eye out for it if you’re interested in learning more.
Windows Server 2008 Editions
Server 2008 comes in eight different flavors, the editions include:
- Windows Server 2008 Standard Edition (x86 and x86-64)
- Windows Server 2008 Enterprise Edition (x86 and x86-64)
- Windows Server 2008 Datacenter Edition (x86 and x86-64)
- Windows Web Server 2008 (x 86 and x86-64)
- Windows Storage Server 2008 (x86 and x86-64)
- Windows Small Business Server 2008 (Codenamed Cougar) (x86-64)
- Windows Server Codenamed “Centro” (for mid-markets)(x86-64)
- Windows Server 2008 for Itanium-based Systems (IA-64)
The first three editions — Standard, Enterprise and Datacenter — should be quite familiar to all of you who have used Windows Server 2000 or 2003 in the past. And most of you will probably be using one of these three editions.
Next we have Windows Web Server, main purpose of which is to handle IIS 7.0. There’s also the Windows Storage Server which is primarily for Storage Area Networks (SAN).
The next two are for small to medium-size businesses and they are the SBS 2008 and Server “Centro”. These two haven’t been released just yet, but they are currently in beta mode.
The last version on the list is for Itanium based systems that use the 64-bit Itanium processor. Now let’s move on to requirements.
Windows Server 2008 Hardware Requirements
When it comes to the minimum requirements for your server, you will need at least 10GB of Hard Disk Space, but you really want to get as much as possible to optimize your server performance.
1GHz 32-bit processor is required, but again this is just the bare minimum. I would recommend getting at least 2GHz.
As far as RAM is concerned, you must have 512MB but again, you should get at least 2GB. Now here is something quite interesting, the MS Server 2008 Standard Edition has a maximum limit of 4GB of RAM, so even if you install more RAM you will only be using 4GB with the Standard Edition.
You’ll also need a DVD drive to run the install, and lastly what Coach Culbertson calls “the blinding flash of the obvious” — your Network Card needs to be installed.
Windows Server 2008 Installation
To start the installation go ahead and boot up the server and insert your Installation DVD/CD.
1. When the Install Windows box comes up go ahead and make the language, time and keyboard selections. When ready, click on the Next button:
2. In the next window, go ahead and click on the Install Now button in the middle of the screen … duh, I know …
3. Locate the product key on your CD case and enter it into the Product key field. When finished, click Next:
4. Select the Windows version that you want to install, but make sure you select the one that you actually purchased, as the pricing for different editions is quite different.
In our example we are going to select the Enterprise edition. We are also going to check the box next to “I have selected the edition of Windows that I purchased”. When ready, go ahead and click Next:
5. Check the box for accepting the license terms and click Next:
6. If this is an upgrade from windows server 2003 you will need to select the Upgrade option all the way on top.
In this example however, we are going to use the Custom option, and we’ll install a clean copy of Windows. So go ahead and make your selection by clicking on the appropriate option:
7. Now you can select which hard disk you want to install the Windows on. In this example we only have one disk listed so we will select it and then click Next:
8. Once the disk is selected, stand back and relax. Windows are installing …
9. Once the first part of the installation is completed, your server will restart and you will get a prompt to change your password. So click the OK button and change your password:
10. Once you change your new password you will see the Initial Configuration Tasks window.
Let’s start with changing the time zone. Click on the Set time zone link at the top:
11. Now this part is easy. In the Date and Time window, click on the change time zone button and select your time zone. Once finished, click OK to get out of the window:
12. Our next step is to configure networking:
Double click on the Local Area Connection and then click on the Properties button:
13. By default IPv6 is enabled, but if you are not going to use it, un-check it — in our example we are going to do exactly that. We’ll un-check IPv6 and then double-click on the IPv4 to open the properties box:
14. Select the use the following IP address radio button and enter your static IP address, subnet mask, default gateway as well as your preferred DNS server. When finished, click the OK button twice and then close:
15. Our next step is to provide the computer name and domain. So let’s go ahead and select that link:
16. To rename the computer, click on the change button:
Type in the new computer name then select the Domain radio button and enter the domain name.
In our example we are only going to change the computer name and leave the setting on Workgroup:
17. Now you need to restart your computer so click OK and wait for the server to boot up:
18. At this point we have completed the first set of tasks — specifying computer information.
We are going to move along and continue with updating your Windows server task list, so let’s click on the Enable automatic updating and feedback link.
19. You will have two choices here: You can enable the automatic updating or you can manually configure the settings. We are going to enable it as it is recommended:
20. We are going to skip the next task, which involves downloading and installing updates, since we have the most recent version of Windows.
If you are not sure if your version is the latest available, go ahead click on the link and install the updates:
Now you are ready to proceed with the next set of tasks — Customizing Your Server. When you customize your server, you will be able to add roles, features, enable remote desktop as well as configure windows firewall. But we’ll leave this for my next article.
Related Posts:
- Windows Server 2008: Install Active Directory Domain Services
- Install BIND DNS on Windows Web Server 2008 – Part 1
- Server 2008: Install Active Directory Certificate Services
- Install DHCP Role on Windows Server 2008
- Server 2008: How to Setup a Remote Desktop on Windows Vista
14 Responses to “How to Install Windows Server 2008”
Leave A Comment:
Socialize
Dave Lawlor Says:
February 28th, 2008 at 12:29 pm
Great article and walk through Gosia! I am looking forward to seeing all you guys on the 11th, and can’t wait for the Server 2008 training.
Does the 4GB limit in Standard apply to the 64-bit version of the product also?
Thanks,
Dave
Gosia Grabowska Says:
February 28th, 2008 at 12:43 pm
Hi Dave!
Thanks for your comment!
This is actually a great question, because I didn’t’ make it very clear in my article. The 4GB limit applies only to the 32-bit version — the 64-bit version can support up to 32GB of RAM.
Hope to see you at the event … Coach’s Server 2008 training is turning out awesome!
Gosia
hassan Says:
February 29th, 2008 at 11:57 am
i like the windows server 2008 enterprise its greats with new featurers especially with the ip version 6
Paulos Kefle Says:
March 3rd, 2008 at 3:54 am
Dear Gosia
Your article is just aheade of the time and always clear and simple.
I have played with Windows Server 2008 and I enjoyed the Security and the grate new features from it. I will be attending the event in Birmingham (UK) and I hope to see more out of this powerful operating system.
Paulos
London (UK)
ajay Says:
March 14th, 2008 at 10:56 am
when i install the window server 2008 os then after the finishing the system asking for login name & password but i not have any password & Login name then what i can do iam using the window server 2008 enterprise x64 edition please give me suggestion how i can find the login name & password.
Gosia Grabowska Says:
March 14th, 2008 at 11:25 am
Hi Ajay,
I think that the login and password that you’re need is the one that you create in Step 9 — in my article above.
After the first part of the installation process, you will be asked to create a login name and password. This is the login information that you need to remember in order to log back into the server.
Hope this helps! Let me know if you have any other questions.
Gosia
knox Says:
March 27th, 2008 at 8:08 am
great stuff. keep it coming.
i would like to try this server 2008
Kim Taylor Says:
May 23rd, 2008 at 1:26 am
How many workgroup computers are allowed on Server 2008 before additional licenses are required? We are now using XP Pro, which allows 10 workgroup computers to be connected to the server, but we need to increase that number. We cannot do it unless we upgrade to one of the Windows Server operating systems, or so I have been told.
MAllen67 Says:
September 10th, 2008 at 3:04 pm
When trying to install it, I get to the part where it asks which hard drive to install to, step #7 in your article above. It replies that it is unable to locate the correct driver. Tried it several times.
Sure appreciate any help.
Chaitanya Says:
December 20th, 2008 at 11:33 am
In the 9th serial of u r post i am getting only first picture and not getting second window
Gosia Grabowska Says:
December 22nd, 2008 at 7:16 am
Chaitanya,
On the first window hit OK to change your password. Once you change your password (and the change was successful) you will get the second window that will confirm it.
Hope this helps.
Gosia
Arumugham S. Says:
December 31st, 2008 at 11:15 pm
I followed the same instruction you had said. But when i type the new password it says “unable to update the password.the value provided for the new password does not meet the length, complexity, or history requirements of the domain”..
i had been trying it many times but all in vain.
i have a doubt whether is there any special format for the password we type.
sorry i m trying out server for 1st time.
Gosia Grabowska Says:
January 2nd, 2009 at 11:17 am
Arumugham,
Try one more time .. this time think of a password that has:
1. At least 8 characters long
2. Includes a number
3. Includes uppercase letter (while the reast are lower case)
4. Includes a special character
For example: Pa$$w0rd123 would meet the requirements:
It’s 11 characters long, has 4 numbers in it (there is a zero between w and r), has one upper case letter and two special characters: $$.
Did it work this time?
LostOne Says:
May 21st, 2010 at 3:21 pm
This is old I know, but it helped me today. Thanks